Makita HM1100C Power Hammer User Manual


 
5
tion. Without proper warm-up, hammering
operation is difficult.
7.
Always be sure you have a firm footing.
Be sure no one is below when using the
tool in high locations.
8.
Hold the tool firmly with both hands.
9.
Keep hands away from moving parts.
10.
Do not leave the tool running. Operate the
tool only when hand-held.
11.
Do not point the tool at any one in the area
when operating. The bit could fly out and
injure someone seriously.
12.
Do not touch the bit or parts close to the
bit immediately after operation; they may
be extremely hot and could burn your
skin.
13.
Some material contains chemicals which
may be toxic. Take caution to prevent dust
inhalation and skin contact. Follow mate-
rial supplier safety data.
SAVE THESE INSTRUCTIONS
WARNING:
MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.
SYMBOLS
USD203-2
The followings show the symbols used for tool.
V .......................volts
A.......................amperes
Hz .....................hertz
................alternating current
....................Class II Construction
.../min................revolutions or reciprocation per
minute
................number of blow