Makita HM1304B Power Hammer User Manual


 
6
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
CAUTION:
Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the OFF
position when released.
Switch can be locked in ON position for ease of
operator comfort during extended use. Apply caution
when locking tool in ON position and maintain firm
grasp on tool.
To start the tool, simply pull the switch trigger. Release the
switch trigger to stop.
For continuous operation, pull the switch trigger and then
slide down the lock button.
To stop the tool from the locked position, pull the switch trig-
ger fully, then release it.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Side handle (auxiliary handle)
The side handle can be either freely swiveled or secured at
one position for use during tool operation. Just loosen the nut
to swivel the handle freely.
To secure the handle at a fixed position, first loosen the nut
and swing the handle to the desired position for use. Then
tighten the nut firmly. If the set bolt turns together with the nut
when you secure the nut, see that the projecting portion of
the side handle fits into the notch on the head of the set bolt.
1. Lock button
2. Switch trigger
1
2
003892
1. Side handle
2. Nut
3. Projecting portion of side handle
4. Notch on set bolt
5. Set bolt
1
2
3
4
5
003893