Filter
Top Products
P 2 / 6
[2] LUBRICATION
Apply a little amount of molybdenum disulfide lubricant to the portions designated with the black triangle, and apply
Makita grease N. No.1 to the portion designated with the gray triangle to protect parts and product from unusual abrasion.
[1] NECESSARY REPAIRING TOOLS
CAUTION: Unplug the tool and remove the bit from the machine for safety before
repair/ maintenance in accordance with the instruction manual!
Repair
DescriptionCode No. Use for
Removing Helical gear 37
Removing Helical gear 37
Removing Helical gear 37
Installing Helical gear 37
Removing Retaining ring R-35
Removing/ Installing Armature
Removing / Installing Drill chuck
Removing Ball Bearings 607LLB and 608LLB
Item No.
8
25
Description
Spindle
Ball bearing 6202DDW
Armature
Portion to lubricate
1R026
1R028
1R037
1R045
1R139
1R223
1R224
1R269
1R346
781024-2
Bearing Setting Pipe 16-8.2
1R005 Retaining ring pliers RT-2N
Bearing setting pipe 20-12.2
Bearing setting plate 20.2
Bearing setting plate 15.2
Gear extractor (large)
Drill chuck extractor
Torque wrench shaft 20-90N.m
Removing / Installing Drill chuck1R298 Hex. bar 10 with square socket
Ratchet head 12.7
Bearing extractor
Center Attachment for 1R045
1R283 Round bar for arbor 9-50
Wrench 43 Removing / Installing keyed Drill chuck
781007-2 Wrench 14 Removing / Installing keyless Drill chuck
Removing/ Installing Armature
14
Drum portion where Ball bearing 6202DDW contacts
Drum portion where Gear housing cover contacts
Gear teeth where 12 Helical gear 37 contacts: 3g in total
25
14
Helical gear 37 Cam portions
Pin 4 Drum portion
1R035
Fig. 1
Gear housing cover
17
17
8
:Makita grease N No.1
:Molybdenum disulfide lubricant