Makita HP2010N Drill User Manual


 
2
SPECIFICATIONS
Manufacturer reserves the right to change specifications without notice.
Specifications may differ from country to country.
GENERAL SAFETY RULES
USA002-2
(For All Tools)
WARNING:
Read and understand all instructions. Failure to follow all
instructions listed below, may result in electric shock, fire and/or
serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area
1.
Keep your work area clean and well lit.
Cluttered benches and dark areas invite acci-
dents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust
or fumes.
3.
Keep bystanders, children, and visitors
away while operating a power tool. Distrac-
tions can cause you to lose control.
Model HP2010N
Speed High Low
Capacities
Concrete 13 mm (1/2”) 20 mm (3/4”)
Steel 6.5 mm (1/4”) 13 mm (1/2”)
Wood 20 mm (3/4”) 40 mm (1-1/2”)
No load speed (RPM) 0 - 2,300/min. 0 - 900/min.
Blows per minute 0 - 46,000 0 - 18,000
Overall length 350 mm (13-3/4”)
Net weight 3.0 kg (6.6 lbs)