Depth rod
.The depth rod
is
used to drill holes of
uniform depth. Loosen the thumb screw
set
the depth rod
to
desired position,
then tighten the thumb screw.
Fig.
4
Handling dust collector
0
Use the dust collector for safe, sanitary
then fix the dust collector on the end
by turning and applying pressure. Then
secure
it
by turning the metal retainer
clockwise.
CAUTION:
Empty the dust collector of
its
contents
after drilling every
2
or
3
holes.
overhead operations. Install the drill bit,
Dust
collector
Fig.
!
How
to
work switchover mechanism
0
For Rotation
+
Hammering:
Press the push rod indCDodirection.
For Rotation only:
Press the Dush rod in &+direction.
Push
rod
Lb-
CAUTION:
Press the push rod
as
far
as
it
will go.
Failure to do
so
can cause rapid wear
of
the switchover mechanism.
Fig.
7