Filter
Top Products
3 Model HR2410
Item Part No.
No. No. Used Description
Item Part No.
No. No. Used Description
85
*
1 Ring Spring 17
86
*
1 Ring Spring 30.5
87
*
1 Spring Guide
88
*
1 Compression Spring 35
89
*
1 Leaf Spring 26
90
*
1 Pin 8
91
*
1 Chuck Ring
92
*
1 Guide Washer
100 534023-1 1 Lead Assy (Orange)
(Includes Item 102)
101 534024-9 1 Lead Assy (Purple)
(Includes Item 102)
102 654069-2 2 Receptacle
Accessories
A01 134777-6 1 Grip 36 Assy [Includes Items
Grip 36 Com. - 152521-9 (Old
152489-9), 5, 6, 7 & 42 - 44]
A02 321144-6 1 Depth Gauge
A03 122331-8 1 Chuck Adaptor Assy (With Screw -
251425-3) (For Swivel Chuck
System)
122573-4 1 Chuck Adaptor Assy [With
Screw -251425-3 (Old 122554-8)
(For Slide Chuck System]
A04 763047-2 1 Drill Chuck S13
A05 798341-3 1 Chuck Key
A06 421342-3 1 Dust Cup 5 (For Bit 7/32” ~ 9/16”)
421664-1 1 Dust Cup 9 (For Bits 15/32” ~ 5/8” & For
Shank 3/8” ~ 11/16”)
A07 765009-6 1 Blow-Out Bulb 64
A08 - - - - 1 Hammer Bit (See Catalogue for Details)
A09 181573-3 1 Bit Grease 100g
A10 182749-5 1 Oil Vessel 30cc (Hammer Grease)
A11 192176-8 1 Dust Extractor Attachment
A12 192278-0 1 Hose 1.5M (4.9Ft.) φ28mm (1-1/8")
192279-8 1 Hose 3.0M (9.8Ft.) φ28mm (1-1/8")
A13 824445-6 1 Plastic Carrying Case
(Includes Item A14)
A14 182935-8 2 Slide Lock
A15 410871-A 1 Vacuum Adaptor 1” X 2-1/8” (I.D),
1-3/16” X 2-1/4” (O.D.) (Used
between A11 and Vacuum)
Dustless System
HR2410 + A11 + A15 + A12—-> Connect to 420S
SERVICE NOTE:
If Chuck is assembled in the wrong way in repairing - with the hole side of Leaf Spring 26 (89) facing the Motor
Housing side, the function of “Easy bit change by merely turning chuck” might be lost due to the interference between
the end face of Compression Spring 35 (88) and that of the Leaf Spring 26 (89).
*
SEE SERVICE CHANGES