9
Insert firmly the hose of the dust extractor attachment into
the hose port of the tool until the hose hits against the bottom
of the port to be fixed firmly to the tool.
Installing dust bag
Keeping the angle of the dust bag with the tool at 90°, insert
the dust bag into the dust exhaust port of the tool. Secure the
dust bag by turning it clockwise.
Adjusting the position of dust extractor
attachment
Loosen the clamp screw of the dust extractor attachment by
turning it counterclockwise.
And then align the tip of the bit with the top of the dust extrac-
tor attachment.
Tighten the clamp screw by turning it clockwise to secure the
dust extractor attachment.
1. Hose
2. Hose port
2
1
003189
1. Dust exhaust port
1
003190
1. Bit
2. Clamp screw
1
2
003191
1. Clamp screw
1
003192