Filter
Top Products
9
Bit grease
Coat the bit shank head beforehand with a small amount of
bit grease (about 0.5 - 1 g).
This chuck lubrication assures smooth action and longer ser-
vice life.
Installing or removing the bit
Clean the bit shank and apply bit grease before installing the
bit.
Insert the bit into the tool. Turn the bit and push it in until it
engages.
After installing, always make sure that the bit is securely held
in place by trying to pull it out.
To remove the bit, pull the chuck cover down all the way and
pull the bit out.
1. Bit shank
2. Bit grease
1
2
001296
1. Bit
2. Chuck cover
1
2
001297
1. Bit
2. Chuck cover
1
2
001298