Filter
Top Products
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle,
outlet, etc.) be sure the voltage supplied is the same as that specified on the
nameplate of the tool. A power source with voltage greater than that specified
for the tool can result
in
SERIOUS INJURY to the user
-
as well as damage to
the tool.
If
in
doubt, DO NOT PLUG IN THE TOOL. Using a power source
with
voltage less than the nameplate rating is harmful to the motor.
For all grounded tools with American type plug.
GROUNDING INSTRUCTIONS: This tool should be grounded while in use to
protect the operator from electric shock. The tool is equipped
with
a three-
conductor cord and three-prong grounding-type plug to fit the proper
grounding-type receptacle. The green (or green and yellow) conductor
in
the
cord is the grounding wire. Never connect the green (or green and yellow) wire
to a live terminal. Your
unit
is for use on
115
volts and has a plug that looks
like Fig.
"A'.
An adapter Fig.
"B"
and "C" is available for connecting Fig.
"A'
type plugs
to two-prong receptacles. The green-colored rigid ear, lug, etc., extending from
the adapter must be connected to a permanent ground, such as a properly
grounded outlet box.
FIG.
A
FIG. B FIG.
C
Adapter
I
Grounding Blade Cover
of
Grounded Outlet
Box
4