Filter
Top Products
9
Bit grease (optional accessory)
Coat the bit shank head beforehand with a small amount of
bit grease (about 0.5 -1 g; 0.02 - 0.04 oz.). This chuck lubri-
cation assures smooth action and longer service life.
Installing or removing the bit
Clean the bit shank and apply bit grease before installing the
bit.
CAUTION:
• Never use A-type shank bits. They can cause damage to
the tool.
Make sure that the mark is visible on the top end of the
tool. If the mark is not visible, pull the chuck cover down
until it is visible.
For drilling
Insert the bit into the tool. Turn the bit and push it in until it
engages.
1. Bit for drilling
2. Bit shank
3. Bit grease
4. Bit for chipping, scaling or demol-
ishing
1
2
4
3
003151
19
37 38.5 3727
16ø
19
AB
003155
1. Mark
2. Chuck cover
1
2
003156
1. Bit
2. Chuck cover
1
2
003162