Filter
Top Products
Using guide rule
(Rip
fence)
1.
When cutting widths
of
under
150
mm
(6")
repeatedly, use
of
the guide rule
will assure fast, clean, straight cuts.
2.
To
attach the guide rule (rip fence), use
the hex wrench to loosen the screw on
the under side
of
the base in front, slip
in the guide rule and secure the screw.
Using circular guide
1.
Use
of
the circular guide insures
smooth cutting
of
circles (radius;
200
mm;
7-7/8")
and arcs.
clean,
under
Fig.
13
Fig.
14
9