Filter
Top Products
Press the shaft lock
so
that the blade can-
not revolve and use the socket wrench to
loosen the hex bolt clockwise. Then re-
move the hex bolt, outer flange and blade.
To
install the blade, mount the blade onto
the spindle, making sure that the direction
of the arrow on the surface of the blade
is
compatible with that on the blade case.
Install the outer flange and hex bolt, and
then use the socket wrench to tighten the
hex bolt securely counterclockwise while
pressing the shaft lock.
Slip the pin on the safety cover into the
slot in the guide arm while returning the
safety cover to
its
original fully closed posi-
tion. Then tighten the hex bolt clockwise
to secure the center cover.
I
Pin
CAUTION
:
Use only the Makita socket wrench to install or remove the blade.
6