Filter
Top Products
Specific Safety Rules
1.
Hold tool by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring. Contact with a "live" wire
will
make exposed metal parts
of
the tool "live" and shock the operator.
2.
Be aware that this tool is always in an operating condition, because
it
does
not have to be plugged into an electrical outlet.
3.
Avoid cutting nails. Inspect workpiece for any nails and remove them before
operation.
4.
Do
not cut oversize workpiece.
5.
Check
for
the proper clearance beyond the workpiece before cutting
so
that
6.
Hold the tool firmly.
7.
Make sure the blade is not contacting the workpiece before the switch is
8.
Keep hands away from moving parts.
9.
Always switch off and wait for the blade to come to a complete stop before
IO.
Do
not touch the blade or the workpiece immediately after operation; they
the blade will not strike the floor, workbench, etc.
turned on.
removing the blade from the workpiece.
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
4