Filter
Top Products
Sight window
There
is
a
convenient sight window on the
left side
of
the tool (when viewing the
tool
from the front).. Use this sight window to
check if there are staples in the magazine.
When staples are not visible through the
window, load staples into the magazine.
Sight
window
/
Staples
0Handle the staples and their box carefully. If the staples have been handled roughly,
.Avoid storing the staples in
a
very humid or hot place or place exposed to direct sun-
0
Do
not attempt to use staples that appear to be damaged, bent, rusty or corroded.
they may be bent out of shape, causing poor staple feed or jamming.
light.
Set plate
Extra staples
This tool has
a
space for storing extra
staples. When you wish to store extra
staples
in this
space,
pull
out the
set
plate
and insert them into the space
as
shown in
the figure
at
right.
staples
into
this space.
CAUTION
:
Always hold the tool with the
set
plate facing up to prevent the extra staples from falling
out when inserting or withdrawing the extra staples. Falling staples can present
a
danger
to anyone or anything below.
11