Filter
Top Products
8
Installing or removing flex wheel
(optional accessory)
WARNING:
• Always use supplied guard when flex wheel is on tool.
Wheel can shatter during use and guard helps to reduce
chances of personal injury.
Follow instructions for depressed center grinding wheel/
Multi-disc but also use plastic pad over wheel. See order of
assembly on accessories page in this manual.
Installing or removing abrasive disc
(optional accessory)
NOTE:
• Use sander accessories specified in this manual. These
must be purchased separately.
Mount the rubber pad onto the spindle. Fit the disc on the
rubber pad and screw the lock nut onto the spindle. To
tighten the lock nut, hold the spindle with the wrench so that
it cannot revolve, then use the lock nut wrench and securely
tighten clockwise.
To remove the disc, follow the installation procedure in
reverse.
1. Lock nut
2. Flexible grinding wheel
3. Pad
4. Inner flange
1. Lock nut wrench
2. Wrench
3. Tighten
1
2
3
4
001093
1
2
001081
1. Lock nut
2. Abrasive disc
3. Rubber pad
1. Lock nut wrench
2. Wrench
3. Tighten
1
2
3
001104
1
2
001081