Filter
Top Products
7
Installing side grip (auxiliary handle)
CAUTION:
• Always be sure that the side grip is installed securely
before operation.
Screw the side grip on the tool securely. The side grip can be
installed on either side of the tool, whichever is convenient.
Installing or removing abrasive disc
Mount the rubber pad onto the spindle. Fit the abrasive disc
on the rubber pad and screw the lock nut onto the spindle.
To tighten the lock nut, hold the spindle with the wrench so
that it cannot revolve, then use the lock nut wrench and
securely tighten clockwise.
To remove the disc, follow the installation procedure in
reverse.
Installing or removing the wool bonnet
(optional accessory)
Mount the rubber pad onto the spindle. Screw the lock nut
onto the spindle.
To tighten the lock nut, hold the spindle with the wrench so
that it cannot revolve, then use the lock nut wrench and
securely tighten clockwise.
1. Grip
1
003445
1. Lock nut
2. Abrasive disc
3. Rubber pad
1
3
2
003455
1. Lock nut wrench
2. Wrench
1
2
003456
1. Wool bonnet
2. Lock nut
3. Rubber pad
1
2
3
003461