Filter
Top Products
4
SERVICE
21. Tool service must be performed only by
qualified repair personnel. Service or main-
tenance performed by unqualified personnel
may result in a risk of injury.
22. When servicing a tool, use only identical
replacement parts. Follow instructions in
the Maintenance section of this manual.
Use of unauthorized parts or failure to follow
Maintenance instructions may create a risk of
shock or injury.
SPECIFIC SAFETY RULES USB064-1
DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to cordless concrete
vibrator safety rules. If you use this tool unsafely or incorrectly,
you can suffer serious personal injury.
1. Always keep your hands and face away
from vibrating head when operating.
2. Switch off the tool immediately if you
notice abnormal noise or something
faulty during operation.
3. Inspect the tool carefully for breakage,
cracks or deformation if you accidentally
drop it or strike it against something.
4. Do not allow pieces of metal, water or
other foreign objects to get into the
charger port where the charging terminals
are located.
5. Do not carry the tool with finger on
switch.
6. Do not set the tool down and switch it on.
The vibrating head may whip around out
of control and cause an accident.
7. Be careful not to allow water, wet concrete
or the like to get into the tool. Do not let
the tool fall into wet concrete.
8. Insert the vibrating head carefully
between iron/steel frames or reinforcing
rods not to come in contact with them.
9. Do not crush or twist the flexible hose.
10. Do not overly bend the flexible hose.
11. Use a wet cloth or the like to carefully
wipe off any wet concrete left on the tool
after use. Extra care should be given to
thorough cleaning of the vents, switch
area, cover openings, etc.
SAVE THESE INSTRUCTIONS
WARNING:
MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.