Filter
Top Products
7
All repairs and maintenance in
this instruction manual must
be performed by a qualified
repair technician who is
experienced with the repair of
electric tools, a qualified
service organization, or
Master Appliance Corp.’s
Repair Department.
For prompt and efficient
maintenance and repair
service, return your product
to:
Master Appliance Corp.
Attn: Repair Department
2420 - 18th Street
Racine, Wl 53403
Please enclose a note
describing your problem and
your phone number.
WARNING: Always unplug
your tool before performing
any maintenance or repairs.
Use only identical Master
Appliance brand replacement
parts.
Heating Elements
Heating element abuse and
eventual burnout can occur
from one of the following
conditions:
1) Inadequate blower speed
2) High line voltage
3) Improper attachment
4) Improper placement of
element or mica insulator
sheets.
5) Nozzle too close to work
being heated (less than 1”).
Lubrication
The bearings are lubricated at
the factory and require no
further lubrication.
Cleaning
Unplug heat gun before
cleaning. To clean outside of
tool, use only a mild soap and
damp cloth. Do not use other
cleaning agents, turpentine,
gasoline, lacquer or paint
thinner, or other solvents that
may contain chemicals which
are harmful to plastics and
other insulating materials.
Never immerse tool in a liquid
or allow a liquid to enter inside
the tool. Make sure all vents
and openings are free and
clear of debris.
Maintenance Instructions