Maytag 130116 Battery Charger User Manual


 
After selecting the proper charge rate and double-checking that the proper charge mode is selected, press the START/STOP button to begin the
charge process. During the charge process the red LED will be steady. If you need to stop the charge process before charging is complete, press
the START/STOP button again or disconnect your battery from the charger.
IMPORTANT If there is a battery error (i.e., reversed polarity or internal short), the charge rate LEDs will
blink together shortly after you press the START/STOP button. If this occurs, remove the battery from the
charger and check all connections and battery integrity before attempting to charge the battery again.
At the end of the charging process, the charger will detect when the battery reaches its peak and will stop
fast charging. At this point, the charge rate LED will begin to blink, indicating that the charger is now in
trickle mode and that the battery is ready for use.
Charging Tips:
Always unplug the charger when you are finished charging.
Let the charger cool between uses, especially on hot or humid days.
New batteries should be charged at the lowest recommended charge rate for the first 3 charging cycles (5 cycles for LiPO cells). This will ensure
your batteries’ long life and optimal capacity.
Always use your charger on a hard surface. Never use it while setting on carpeted surfaces. Carpeted surfaces will block the cooling vents on the
bottom of the charger, which can cause the charger to overheat during use.
Most LiPO cells can be charged at 1C, but charging at .5C will produce a better charge and prolong the life of the battery. It will also lessen the
chance of damaging the battery during the charging process.
Your new WattAge Charge-It-All Sport AC/DC Peak Charger is guaranteed to be free of workmanship and component error for a period of 90 days
starting from the original time of purchase. Warranty claims must be accompanied by an itemized sales receipt that shows the purchase date.
In that WattAge has no control over the final use of this product, by installing and using the product, the user accepts all liability resulting from
or included with the installation and use of this product. In no instance will the liability cost of the charger exceed the original purchase price of
the charger.
FOR SERVICE AND INFORMATION WITHIN THE USA:
Global Services/WattAge Customer Care
18480 Bandilier Circle
Fountain Valley, CA 92708
Phone: (714) 963-0329 Fax: (714) 964-6236
Email: service@globalhobby.net
http://globalservices.globalhobby.com
WattAge IS EXCLUSIVELY DISTRIBUTED IN THE USA BY
GLOBAL HOBBY DISTRIBUTORS
All contents copyright © 2005, Global Hobby Distributors
Version V1.0 January 2005
3