Filter
Top Products
240 |
KGS 255 KGS 255 Plus
CROSSCUT AND MITRE SAWS
Special advantages
Standard-equipped with
a flange laser
Integrated cutting depth control
Transport lock
Chip collection bag for clean air at
the workplace
Comparative device characteristics
Dimensions L x W x H 508 x 747 x 470 mm 1.020 x 508 x 470 mm
Support surface 272 x 437 mm 272 x 437 mm
Cutting width
- 90° 255 mm 255 mm
- 45° 177 mm 177 mm
Cutting depth
- 90° 60 mm 60 mm
- 45° 30 mm 30 mm
No load speed 5.700 /min 5.700 /min
Rated load speed 3.041 /min 3.041 /min
Cutting speed 66 m/s 66 m/s
Saw blade Ø 210 x 30 mm Ø 210 x 30 mm
Adjustment options
- Turntable left (maximum) 47 ° 47 °
- Turntable right (maximum) 47 ° 47 °
- Saw head left (maximum) 47 ° 47 °
- Saw head right (maximum) -2 ° -2 °
Mains voltage 230 V 230 V
Rated input power 1,3 kW 1,3 kW
Output power 0,75 kW 0,75 kW
Weight 14,5 kg 17 kg
Standard equipment Carbide saw blade with alternately
bevel-ground tooth (20 teeth), tool for saw
blade change, chip extraction connections
Carbide saw blade with alternately
bevel-ground tooth (40 teeth), 2 table length
extensions, work clamp, tool for saw blade
change, chip extraction connections,
dust bag, laser
Type KGS 255 KGS 255 Plus
Order no. 0102550000
0102550100
COMMON FEATURES
For cutting wood, coated panels and plastics
Simple cutting of all angular, bevel and rafter cuts
Powerful, universal motor , stops in 4.5 seconds
Stable design, mobile and sturdy
Turntable with precise angle adjustment
Die-cast aluminium work bench
Low own weight for easy transport
Horizontal angle adjustment, left and right up to 47°
Saw head inclination from -2° to 47°
Precisely supported draw gear for cuts up to max. 255 mm
Extensive range of accessories
Crosscut and Mitre Saw
KGS 255
Crosscut and Mitre Saw
KGS 255 Plus
... with sliding function... with sliding function
NEW
0102550038
GB
0102550039
GB
230 V
110 V
0102550138
GB
0102550139
GB
230 V
110 V