Filter
Top Products
260 |
PRECISION CIRCULAR SAWS
Order no.
Table length extension
For the secure
supporting of long
workpieces
With height
adjustable
support leg and
auxiliary fence rail
Eccentric clamp -
easy to mount
and dismount
Front/rear mounting
on the base support
system
HC 333: Mounting
possible on both sides
of the dressing plates
Length: 1.000 mm
Width: 200 mm
0910018469
Other accessories
Order no.
Mitre guide
For precise cross cuts
and angular cuts
Infinitely variable,
both sides adjustable,
90°-45°
0910059963
Mitre guide
For precise cross cuts
and angular cuts
With workpiece bearing
made of aluminium
Infinitely variable, both sides
adjustable, 90°-45°
0910008048
Roller stand RS 420
For supporting long workpieces
when sawing, moulding/routing,
planing and drilling
Sturdy, height-adjustable and foldable
With smooth-rolling special steel rollers
with a high load capacity
Width: 400 mm
Base weight: 100 kg
Height: 640 - 1.015 mm
0910053353
Roller stand RS 420 G
For supporting long workpieces
when sawing, moulding/routing,
planing and drilling
Sturdy, height-adjustable and foldable
With smooth-rolling chromium-plated
ball bearings
Also permits lateral movements
Ideal for panel material
Width: 520 mm
Base weight: 100 kg
Height: 640 - 1.015 mm
0910053345
Roller stand RS 420 W
For supporting long workpieces
when sawing, moulding/routing,
planing and drilling
Sturdy, height-adjustable and foldable
With smooth-rolling chromium-plated
ball bearings
Adjustable ball bearing gib
Also permits lateral movements
Ideal for panel material,
round or square workpieces
Width: 420 mm
Base weight: 100 kg
Height: 640 - 1.015 mm
0910053361
Push block
For the lateral guiding
of the workpiece
0910057200
Chip and dust extraction units
Order no.
Chip and dust extraction unit
For a cleaner work
environment and an
unobstructed view of the
workpiece you want to cut
For connecting to a chip
and dust extraction system
With this accessory,
the machine is dust-proof
Extraction nozzle Ø: 100 mm
Suitable for: PK 200
0910017608
Chip and dust extraction unit
For a cleaner work
environment and an
unobstructed view of the
workpiece you want to cut
For connecting to a chip
and dust extraction system
With this accessory,
the machine is dust-proof
Extraction nozzle Ø: 100 mm
Suitable for: PK 250 until 1993,
PK 255
0910014374
Circular saw blades
Top cutting results thanks to teeth
ground on all sides and high accuracy
of flatness and concentric running
Tungsten carbide blades: long tool
life thanks to use of unmixed carbide
Can be reground repeatedly
Made in Germany
Material Dimensions
mm
Tooth
pitch
Version Order no.
For PK 200
Tungsten
carbide
210 x 2,4 x 30 30 Alternately bevel-
ground tips
6.28036
Tungsten
carbide
210 x 2,4 x 30 42 Alternately bevel-
ground tips
6.28039
Tungsten
carbide
210 x 2,4 x 30 64 Alternately bevel-
ground tips
6.28081
Tungsten
carbide
210 x 2,4 x 30 40 Alternately bevel-
ground tips, 3°
6.28037
For PK 255
Tungsten
carbide
250 x 2,8 x 30 24 Alternately bevel-
ground tips
6.28012
Tungsten
carbide
250 x 2,8 x 30 34 Alternately bevel-
ground tips,
Combo secondary
hole holder
6.28045
Tungsten
carbide
250 x 2,8 x 30 42 Alternately bevel-
ground tips,
Combo secondary
hole holder
6.28046
Tungsten
carbide
250 x 2,8 x 30 60 Alternately bevel-
ground tips,
Combo secondary
hole holder
6.28049
Tungsten
carbide
250 x 3,2 x 30 60 Alternately bevel-
ground tips,
Combo secondary
hole holder
6.28050
Tungsten
carbide
250 x 2,8 x 30 80 Alternately bevel-
ground tips,
Combo secondary
hole holder
6.28087
Tungsten
carbide
250 x 2,8 x 30 80 Flat tooth/
trapezoidal tooth,
5° negative
6.28088