Filter
Top Products
| 181
ACCESSORIES FOR ROUTERS
Order no.
Flexible shaft
Suitable for speeds
of 20,000 to
30 000 rpm
Bearing-mounted
at both ends
Equipped with
collet for size 6 mm,
6.30714
To drive the flexible
shaft 6.27609 using
the router's motor
unit, the 8-mm collet
on the tool must be
replaced with the
6-mm collet 6.31945
Length: 1,3 m
Driving shaft: 6 mm
Collet bore: 6 mm
Weight: 0,8 kg
6.27609
Collets for flexible
shaft 27609
Collet bore:
6 mm
6.30714
Collet bore:
3 mm
6.30715
Collet bore:
1/4" (6.35 mm)
6.30716
Clamping stand
For clamping
the router motor
when working with
the flexible shafts
Locating
bore Ø 43 mm
6.27354
Clamp
For the secure
fitting on a
work table
6.27107
FOR FME 737
Order no.
Moulding/routing
attachment
for FME 737
With this moulding/
routing attachment,
router and grinder
motor FME 737
can be converted
into a router
6.31501
Work benches
Order no.
Flexo 500 universal table
For the stationary use of Metabo
jig saws, routers and circular saws
(when using appropriate accessories)
With foldable stand and height
adjustment
Sturdy steel construction and
a large table top made from
continuous strand casting
0910064304
Special accessories for Flexo 500
Order no.
NEW
Router set
For OFE 738, Of E 1229 Signal,
Of E 1812
Weight around 2.5 kg
0910064380
NEW
Chip and dust extraction unit
Extraction at two points:
at chip box and at the top
on the guard
Clear view of the
work piece
Cleaner working
environment
Extraction nozzle Ø:
100 mm
0910064371
NEW
Mitre guide
Length of rule: 250 mm
Angle area: +/- 60°
0910064410
NEW
ANGLE GRINDERSMETAL PROCESORSHAMMERSIMPACT DRILLSDRILLSSCREWDRIVERS
WOOD SANDING
MACHINES
ROUTERS
AND PLANERS
GB
GB
GB
GB