Filter
Top Products
Specifications (Subject to change without notice.)
Gun Model
C-3010
C-3012
C-3015
C-4010
C-4012
C-4015
C-5010
C-5012
C-5015
C-6010
C-6012
C-6015
Part No.
#194 751
#194 752
#194 753
#194 754
#194 755
#194 756
#194 757
#194 758
#194 759
#194 760
#194 761
#194 762
Rated Output
300 Amps
400 Amps
500 Amps
600 Amps
Duty Cycle
100% using CO
2
(ratings with
mixed gas are reduced by 10–50%
depending on the gas mixture and
welding parameters)
Cable Length
10 ft (3.0 m)
12 ft (3.7 m)
15 ft (4.6 m)
10 ft (3.0 m)
12 ft (3.7 m)
15 ft (4.6 m)
10 ft (3.0 m)
12 ft (3.7 m)
15 ft (4.6 m)
10 ft (3.0 m)
12 ft (3.7 m)
15 ft (4.6 m)
Standard Wire Size
.035–.045 in
(0.9–1.2 mm)
.035–.045 in
(0.9–1.2 mm)
.052–1/16 in
(1.3–1.6 mm)
.052–1/16 in
(1.3–1.6 mm)
Weight
5.6 lb (2.5 kg)
6.4 lb (2.9 kg)
7.5 lb (3.4 kg)
7.5 lb (3.4 kg)
8.6 lb (3.9 kg)
10.3 lb (4.7 kg)
9.3 lb (4.2 kg)
10.8 lb (4.9 kg)
13.0 lb (5.9 kg)
10.3 lb (4.7 kg)
12.0 lb (5.4 kg)
14.5 lb (6.6 kg)
Genuine Miller Options
(Order from Miller Service Parts.)
Locking Trigger Switch #199 661
Allows trigger to be locked during long welds.
Gun Hook #199 662
Enables gun to be stored between welds.
Aluminum Conversion Kit #202 895
Steel wrapped nylon liner allows 10 ft Roughneck
®
welding guns to feed 3/64–1/16 in (1.2–1.6 mm)
aluminum wire.
Miller Roughneck Consumable
Upgrade Kits for Tweco
®
Guns
300/400/500 Amp #214 893
Includes gas diffuser and neck insulator. Upgrades
a Tweco gun for use with patented Miller FasTip
™
contact tips. (Order FasTip contact tips separately.)
Tweco is a registered trademark of Thermadyne.
Heat Shields
300/400 Amp #213 229
500/600 Amp #213 230
Machine Adapter Kit #199 663
Allows Roughneck welding guns to adapt to
Hobart and Thermal Arc products (BETAMIG II,
200, 250, 251; Hefty; 2000 Series; Dual/Digital
2000; Porta-Feed and Ultra-Feed), Lincoln
products (Power MIG 255; Wirematic 250,
255; SP-T Series; Power Feed 10; DH-10; LN-10
(new style) and STT-10) and ESAB products
(Migmaster 180). Tweco style 5/8 in direct plug.
Requires ordering a new replacement liner.
Machine Adapter Kit #199 664
Allows Roughneck welding guns to adapt to
Lincoln products (LN-7, LN-8, LN-9, LN-22,
LN-25 and LN-742). Requires ordering a new
replacement liner.
DSS-8 #079 693
A 15 ft 2-position (dual pull) trigger switch that
attaches to the gun handle and is used in place
of the standard trigger for dual scheduling.
Adapter cord #157 364 is required to use the
DSS-8 with 60M wire feeders.
DSS-9 #071 833
A 15 ft 2-position slide switch that attaches to
the gun handle and is used to select the desired
welding condition for dual scheduling. Gun
trigger operates as standard trigger. Adapter
cord #157 364 is required to use the DSS-9 with
60M wire feeders.
DSS-9M #041 793
A 15 ft 2-position slide switch that attaches to
the gun handle and is used to select the desired
welding condition for dual scheduling with the
60M wire feeder. Gun trigger operates as
standard trigger.
2