Filter
Top Products
OM-2223 Page 16
4-6. Tipping
! Do not move or operate unit
where it could tip.
4-7. 115 VAC Receptacle, Supplementary Protectors, And Weld Output Terminals
3
Ref. 802 295
! Turn Off power before
connecting to receptacle, or
weld output terminals.
1 115 V 15 A AC Receptacle
RC9
Power is shared between RC9, Re-
mote 14 receptacle RC8 and termi-
nal strip 1T (see Section 4-11).
2 Supplementary Protector CB1
3 Supplementary Protector CB2
CB1 protects 115 volts ac portion of
RC8, 1T, and RC9 from overload.
CB2 protects 24 volts ac portion of
RC8 and 1T from overload.
Press button to reset protector.
4 Positive High Inductance
(Submerged Arc) Weld Output
Terminal
Use this terminal for Submerged
Arc (SAW), TIG (GTAW)-scratch
start only, or Stick (SMAW) applica-
tions.
5 (+) Positive Low Inductance
Weld output terminal
Not recommended for Submerged
Arc applications.
6(−) Negative Weld Output
Terminal
Connect work cable to this terminal
for Submerged Arc applications.
1
2
4
5
6