Filter
Top Products
5
Genuine Miller Accessories (continued)
MIG/Flux Cored Welding (continued)
SuitCase
™
8RC Wire Feeder #194 938
SuitCase
™
12RC Wire Feeder #194 940
Lightweight, modular design and flexible
enough to run a variety of wires up to 5/64 in
diameter. Comes standard with remote
voltage control. See Lit. Index No. M/6.5.
S-32SL Wire Feeder #109 294
Simple to use, but with all the features
needed for heavy-duty applications up to
7/64 in wire diameter. See Lit. Index
No. M/6.21.
Spoolmatic
®
30A Spool Gun
#130 831
Air-cooled, 200-amp, 1-lb spool gun for
aluminum MIG. See Lit. Index No. M/1.73.
WC-24 Control #137 549
Use with Spoolmatic 30A.
XR
™
Wire Feeders and Guns
Push-pull system designed to handle
difficult-to-feed soft alloy wires such as
aluminum. See Lit. Index No. M/1.7,
M/1.71, and M/1.73.
TIG (GTAW) Welding
Dynasty
®
200 Series
For premium portable AC/DC TIG arc
quality. See Lit. Index No. AD/4.8.
HF-251 Series #042 388
HF-251D-1, 115 VAC
High-frequency arc starter and stabilizer.
See Accessory Lit. Index No. AY/5.0.
Remote Controls
RHC-14 Hand Control
#129 340
Miniature hand control for
remote current and contactor
control. Dimensions: 4 x 4 x
3-1/4 in (102 x 102 x 82 mm). Includes
20 ft (6 m) cord and 14-pin plug.
RFCS-14 HD Foot
Control #194 744
Heavy-duty foot current
and contactor control.
Includes 20 ft (6 m)
cord and 14-pin plug.
RMLS-14 #129 337
14-pin plug Momentary- and maintained-
contact rocker switch for contactor control.
Push forward for maintained contact and
back for momen tary contact. Includes 20 ft
(6 m) cord.
RCC-14 Remote Contactor and Current
Control #151 086 14-pin plug
Rotary-motion fingertip control fastens to
TIG torch using two Velcro
®
straps.
Includes 28 ft (8.5 m) control cord.
Extension Cords for 14-Pin
Remote Controls
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (23 m)