Filter
Top Products
Consumable M-10/15 M-25 M-40
Contact Tips
.023/.025 in (0.6 mm) #087 299 #087 299 #087 299
.030 in (0.8 mm) #000 067 #000 067 #000 067
.030 in (0.8 mm) tapered #176 797 #176 797
.035 in (0.9 mm) #000 068 #000 068 #000 068
.035 in (0.9 mm) tapered #176 793 #176 793
.035 in (0.9 mm) heavy-duty #187 117 #187 117
.045 in (1.2 mm) #000 069 #000 069 #000 069
.045 in (1.2 mm) tapered #176 794 #176 794
.045 in (1.2 mm) heavy-duty #187 118 #187 118
3/64 in (1.2 mm) aluminum wire #172 034 #172 034
.052 in (1.3 mm) #044 392 #044 392
1/16 in (1.6 mm) #172 024
5/64 in (2.0 mm) #172 025
Contact Tip and Nozzle Adapters
Contact tip/nozzle adapter #169 716
Contact tip adapter #169 728 #169 728
Nozzle adapter #169 729 #169 729
Nozzles
1/2 in (13 mm) orifice flush tip (standard on M-10/15) #169 715
Spot flat #176 237
Spot inside corner #176 239
Spot outside corner #176 241
1/2 in (13 mm) orifice flush tip (standard on M-25) #200 258 #200 258
1/2 in (13 mm) orifice 1/8 in (3.2 mm) recessed tip #169 724 #169 724
5/8 in (16 mm) orifice flush tip (standard on M-40) #169 726 #169 726
5/8 in (16 mm) orifice 1/8 in (3.2 mm) recessed tip #169 725 #169 725
5/8 in (16 mm) orifice 1/8 in (3.2 mm) stickout tip #169 727 #169 727
Spot flat #176 238 #176 238
Spot inside corner #176 240 #176 240
Spot outside corner #176 242 #176 242
3/8 in (9.5 mm) orifice tapered #176 243 #176 243
11/32 in (8.7 mm) orifice tapered #178 386 #178 386
Gasless nozzle #213 077 #213 078 #213 078
Replacement Liners
.023 /.025 in (0.6 mm) #194 010 #194 010 #194 010
.030–.035 in (0.8–0.9 mm) #194 011 #194 011 #194 011
.035–.045 in (0.9–1.2 mm) #194 012 #194 012 #194 012
1/16–5/64 in (1.6–2.0 mm) #194 013
3/64 in (1.2 mm) 10 ft (3 m) steel wrapped nylon #194 014 #194 014
Litho in USA
Distributed by:
Equipment and Options Stock No. Description Qty. Price
M-10 #195 605 10 ft (3 m). For .030–.035 in (0.8–0.9 mm) wire
M-15 #169 589 10 ft (3 m). For .030–.035 in (0.8–0.9 mm) wire
#169 591 12 ft (3.7 m). For .030–.035 in (0.8–0.9 mm) wire
#169 593 15 ft (4.6 m). For .030–.035 in (0.8–0.9 mm) wire
M-25 #169 594 10 ft (3 m). For .030–.035 in (0.8–0.9 mm) wire
#169 596 12 ft (3.7 m). For .030–.035 in (0.8–0.9 mm) wire
#169 598 15 ft (4.6 m). For .030–.035 in (0.8–0.9 mm) wire
#169 599 15 ft (4.6 m). For .035–.045 in (0.9–1.2 mm) and wire
M-25M #169 601 15 ft (4.6 m). For .030–.035 in (0.8–0.9 mm) wire
M-40 #169 602 10 ft (3 m). For .035–.045 in (0.9–1.2 mm) wire
#169 604 12 ft (3.7 m). For .035–.045 in (0.9–1.2 mm) wire
#169 606 15 ft (4.6 m). For .035–.045 in (0.9–1.2 mm) wire
Date: Total Quoted Price:
Ordering Information
Genuine Miller Accessories
(Order from Miller Service Parts.)
M-10/15 Gun Convenience Kit #193 973
3 – .023/.025 in (0.6 mm) contact tips (#087 399)
5 – .030 in (0.8 mm) contact tips (#000 067)
5 – .035 in (0.9 mm) contact tips (#000 068)
1 – Contact tip/nozzle adapter (#169 716)
2 – Shock washers (#169 717)
3 – O-rings (#170 471)
1 – 1/2 in (13 mm) dia. orifice nozzle (#169 715)
M-25/40 Gun Convenience Kit #193 975
5 – .035 in (0.9 mm) contact tips (#000 068)
5 – .045 in (1.2 mm) contact tips (#000 069)
2 – Contact tip adapter (#169 728)
1 – Nozzle adapter (#169 729)
3 – O-rings (#170 468)
2 – Shock washers (#169 730)
1 – 5/8 in (16 mm) dia. orifice nozzle (#169 726)
Machine Adapter Kit #201 723
Allows MIGmatic welding guns to adapt to older
Hobart products (Handler, Handler 120 and 150,
BETA-MIG 170, 1800, 200, 250, 251 and BETA-MIG II).
Machine Adapter Kit #201 722
Allows MIGmatic welding guns to adapt to older Miller
products (10, 30, 70, and 80 Series wire feeders).
Machine Adapter Kit #201 724
Allows MIGmatic welding guns to adapt to Lincoln
products (LN-7, LN-8, LN-9, LN-22 and LN-25
series wire feeders; and SP-150, SP-200 and
SP-250 machines).
Aluminum Conversion Kit #172 136
For M-25 and M-40 only. Allows 10 ft (3 m) guns
to feed 3/64 in (1.2 mm) aluminum wire.
Consumables
(Order from Miller Service Parts.)