Filter
Top Products
Processes
MIG (GMAW)
Flux Cored (FCAW)
Input Power
200(208)/230 V
Industrial Applications
Light Fabrication
Garages/Body Shops
Farm/Ranch
Vocational/Technical Schools
Quick
Specs
Millermatic
®
212
MIG Arc Welding
Power Source
Issued August 2007 • Index No. DC/12.46
NEW!
Angled, dual-gear driven, cast
aluminum drive system features
no-tool, quick-change reversible drive
rolls and an easy-to-set, scaled tension
knob. See page 3 for more information.
The Power of Blue
®
.
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Web Site
www.MillerWelds.com
International Headquarters
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
Rated Output 160 A at 24.5 VDC, 60% Duty Cycle
Max. Open-Circuit Voltage 34.5 VDC
Amperage Range 30 – 210 A
Wire Feed Speed 50–700 IPM (1.3–17.8 m/min)
Weight 190 lb (86 kg)
Seven taps provide wider welding range
of 30–210 amps with improved high and
low ends to weld materials from 22 gauge
up to 3/8 in (9.5 mm) thick in a single pass.
NEW!
Thermal overload protection shuts
down unit and activates over temperature
light if airflow is blocked or duty cycle is
exceeded. Automatically resets when fault
is corrected and unit cools.
NEW!
Patent-pending EZ-Change
™
Low
Cylinder Rack allows operators to easily
roll cylinders on and off of rack—no
need to lift cylinders. See page 3 for
more information.
Less weld cleanup with Active Arc
Stabilizer
™
—patented Miller design
provides excellent starts proven superior
to the competition.
Welder is warranted for 3 years, parts and labor.
Original main power rectified parts are warranted for 5 years.
Gun warranted for 90 days, parts and labor.
Add the Spoolmate
™
3035 spool gun
for aluminum welding. Easy to install
with direct hook up. And with Miller’s
exclusive Gun-On-Demand,
™
simply pull
the trigger for either gun and you’re ready
to weld. No time wasted toggling switches!
Comes Complete With:
7 ft (2.1 m) power cord and plug
NEW!
15 ft (4.6 m), 250 amp M-25
MIG gun for .030/.035 in wire
10 ft (3 m) work cable and clamp
Argon mix regulator/flow gauge
and hose
Extra contact tips
NEW!
Factory-installed running gear
with EZ-Change
™
Low Cylinder Rack
.030/.035 in reversible drive rolls
NEW!
Set-up and operation
interactive CD
NEW!
EZ-Access
™
Consumable
Compartment and Parameter Chart —
set weld parameters right the first time with
convenient new flip-down compartment
that provides fast access to parameter
chart and consumables. See page 3 for
more information.
NEW!
Larger
work area —
now with longer
15-ft M-25 gun.