Filter
Top Products
6
For M-25 Gun
Contact Tips
#087 299 .023/.025 in (0.6 mm)
#000 067 .030 in (0.8 mm)
#000 068 .035 in (0.9 mm)
#000 069 .045 in (1.1 mm)
#187 117 .035 in (0.9 mm) heavy-duty tip
#187 118 .045 in (1.2 mm) heavy-duty tip
Tapered Contact Tips
#176 797 .030 in (0.8 mm)
#176 793 .035 in (0.9 mm)
#176 794 .045 in (1.2 mm)
Contact Tip Adapter #169 728
Replacement Liners
#194 010 .023/.025 in
#194 011 .030–.035 in (standard)
#194 012 .035–.045 in
Nozzles
Note: Flush or stickout nozzles should be used for
the short-circuit process.
#200 258 Standard
1/2 in (13 mm) diameter orifice. Nozzle
flush with contact tip.
#169 726
5/8 in (16 mm) diameter orifice.
Nozzle flush with contact tip.
#169 727
5/8 in (16 mm) diameter orifice. Contact tip
sticks out of nozzle 1/8 in (3.2 mm).
#169 724
1/2 in (13 mm) diameter orifice. Contact tip
recessed 1/8 in (3.2 mm) into nozzle.
#169 725
5/8 in (16 mm) diameter orifice. Contact tip
recessed 1/8 in (3.2 mm) into nozzle.
Spot Nozzles
#176 238 Flat
#176 240 Inside corner
#176 242 Outside corner
Tapered Nozzles
Note: Tapered tips are recommended when using a
tapered nozzle.
#176 243 3/8 in (9.5 mm) diameter orifice
#178 386 11/32 in (8.7 mm) diameter orifice
Gun Convenience Kit #193 975
Contains:
5 – .035 in (0.9 mm) contact tips (#000 068)
5 – .045 in (1.2 mm) contact tips (#000 069)
2 – Tip adapters (#169 728)
1 – Nozzle adapter (#169 729)
3 – O-rings (#170 468)
2 – Shock washers (#169 730)
1 – 5/8 in (16 mm) diameter orifice nozzle
(#169 726)
Drive Rolls
Note: Drive roll kits include two drive rolls and an
inlet guide.
V-Grooved Drive Roll Kits (solid wire)
#204 579 .030 & .035 in (0.8 & 0.9 mm)
Combination (Reversible)
#087 131 .023/.025 in (0.6 mm)
#079 594 .030 in (0.8 mm)
#079 595 .035 in (0.9 mm)
V-Knurled Drive Roll Kits
(Flux Cored or difficult-to-feed wire)
#079 606 .035 in (0.9 mm)
For Spoolmate
™
3035 Gun
Contact Tips (5 per package)
#199 730 For .023/.025 in (0.6 mm) wire.
#186 419 For .030 in (0.8 mm) wire.
#186 406 For .035 in (0.9 mm) wire.
Nozzle #186 405
Drive Roll (1)
#199 731 For .023 in (0.6 mm) wire.
#186 413 For .030/.035 in (0.8/0.9 mm)
wire.
Push Roll (1)
#199 732 For .023 in (0.6 mm) wire.
#186 414 For .030/.035 in (0.8/0.9 mm)
wire.
Consumables (Order from Miller Service Parts.)