Filter
Top Products
Genuine Miller Accessories
(Continued)
Remote Controls and Switches
RMLS-14 #129 337
Momentary- and maintained-contact rocker
switch for contactor control. Push forward
for maintained contact and back for
momen tary con tact. Includes 20 ft (6 m)
cord and 14-pin plug.
RCC-14 Remote Contactor and Current
Control #151 086
Rotary-motion (side to side) fingertip
control. Fastens to TIG torch using two
Velcro strips. Allows complete current and
contactor control at operator’s fingertips.
Includes 28 ft (8.5 m) cord and plug.
RCCS-14 Remote Contactor and Current
Control #043 688
Up-and-down rotary-motion fingertip
control. Great for applications that require
a finer amperage control. Includes 28 ft
(8.5 m) control cord.
RHC-14 Hand Control
#129 340 20 ft (6 m) cord
Miniature hand control with 14-pin plug
for remote current and contactor control.
Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x
82 mm).
RFCS-14 Foot Control #043 554
Heavy-duty foot current and contactor
control. Includes 20 ft (6 m) cord and
14-pin plug.
Extension Cables for 14-Pin Plugs to
14-Pin Sockets
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (22.8 m)
This extension cord makes a direct
connection between the power source and
the accessory control or wire feeder. No
messy splicing or adapting required.
No. 2 Stick Cable Set
#195 196 15 ft (4.6 m)
Consists of 15 ft (4.6 m) No. 2 electrode
cable and holder, and 15 ft (4.6 m) work
cable and clamp. 200 A, 100% duty cycle.
No. 2 Stick Cable Set
#195 195 50 ft (15.2 m)
Consists of 50 ft (15.2 m) No. 2 electrode
cable and holder, and 50 ft (15.2 m) work
cable and clamp. 200 A, 100% duty cycle.
Shopmate
™
300 Running Gear/
Dual Cylinder Rack #300 145
The large 10 in (254 mm) rear wheels and
4 in (102 mm) front casters on this running
gear provide excellent mobility on the shop
floor, making it easier to move the power
source around and over cables and cracks.
Very easy to install. Handles double as weld
cable holder. Holds two cylinders.
TIG (GTAW) Torches
Weldcraft
®
TIG Torches
The Weldcraft line of TIG
torches complements the
most popular TIG power
source line available today. The Weldcraft
torch line includes both air-cooled and
water-cooled models. Available with
genuine Weldcraft parts.
Air-Cooled Torch #WTP17VRM
150 amp air-cooled TIG torch with valve,
flowmeter and 25 ft (7.6 m) cables.
Air-Cooled Torch #WTP26VRM
200 amp air-cooled TIG torch with valve,
flowmeter and 25 ft (7.6 m) cables.
TIG (Gas Tungsten Arc Welding) Handbook
#170 555
To order, call the Miller Literature
Distribution Center at 1-920-751-2120, or
FAX 1-920-751-2121. A comprehensive,
text on all aspects of the TIG process.
6