Milwaukee 48-59-2818 Battery Charger User Manual


 
10 11
WARNING
To reduce the risk of injury, always
unplug the charger and remove
the battery pack from the charger
before performing any maintenance.
Never disassemble the battery pack
or charger. Contact a MILWAUKEE
service facility for ALL repairs.
To reduce the risk of injury and
damage, never immerse your battery
pack or charger in liquid or allow a
liquid to ow inside them.
service facility.
Charging a Hot or Cold Battery Pack
The Red Flashing Indicator light on the
charger indicates that the battery pack
temperature is outside the charging range.
Once the pack is within the acceptable range,
normal charging will take place and the red
Battery Pack
Temperature
150°F or more
32°F to 150°F
14°F to 32°F
14°F or less
Red Charger
Indicator Light
Flashing
Continuous
Continuous
Flashing
Charging Status
Not charging
Normal charging
Warm-up charging
Not charging
Li-Ion Charging Status
Battery Pack
Temperature
140°F or more
32°F to 140°F
32°F or less
Red Charger
Indicator Light
Flashing
Continuous
Flashing
Charging Status
Not charging
Normal charging
Not charging
NiCd Charging Status
Cleaning
Clean out dust and debris from charger vents
and electrical contacts by blowing with com-
pressed air. Use only mild soap and a damp
cloth to clean the battery pack and charger,
keeping away from all electrical contacts.
Certain cleaning agents and solvents are
harmful to plastics and other insulated parts.
Some of these include gasoline, turpentine,
lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household
detergents containing ammonia. Never use
ammable or combustible solvents around
battery packs, charger, or tools.
Repairs
The MILWAUKEE Li-Ion/NiCd charger has
no internal serviceable parts. For cordset
repairs, return the charger to the nearest
authorized service center.
light will be continuous. Hot or cold battery
packs may take longer to charge.
Powering the Charger with an Inverter
or Generator
The charger will operate with most gen-
erators and inverters rated at 300 Watts
or higher.
Maintenance and Storage
Store your charger in a cool, dry place.
As a general practice, it is best to unplug
battery chargers and remove battery packs
when not in use. No battery pack damage
will occur, however, if the charger and battery
pack are left plugged in.
FIVE YEAR TOOL LIMITED WARRANTY
Every MILWAUKEE electric power tool (including battery charger) is warranted to the original
purchaser only to be free from defects in material and workmanship. Subject to certain excep-
tions, MILWAUKEE will repair or replace any part on a electric power tool which, after examina-
tion, is determined by MILWAUKEE to be defective in material or workmanship for a period of
ve (5) years* after the date of purchase. Return the electric power tool and a copy of proof
of purchase to a MILWAUKEE factory Service/Sales Support Branch location or MILWAUKEE
Authorized Service Station, freight prepaid and insured, are requested for this warranty to be
effective. This warranty does not apply to damage that MILWAUKEE determines to be from
repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse,
alterations, abuse, normal wear and tear, lack of maintenance, or accidents.
* The warranty period for Hoists (lever, hand chain, & electric chain hoists), Ni-Cd battery
packs, Work Lights (cordless ashlights), Job Site Radios, and Trade Titans™ Industrial Work
Carts is one (1) year from the date of purchase.
*There is a separate warranty for Li-Ion Battery Packs that accompany the power tools:
*Every MILWAUKEE Li-Ion Battery Pack is covered by an initial 1000 Charges/2 Years free
replacement warranty. This means that for the earlier of the rst 1000 charges or two (2) years
from the date of purchase/ rst charge, a replacement battery will be provided to the customer
for any defective battery free of charge. Thereafter, customers will also receive an additional
warranty on a pro rata basis up to the earlier of the rst 2000 charges or ve (5) Years from
the date of purchase/ rst charge. This means that every customer gets an additional 1000
charges or three (3) years of pro rata warranty on the Li-Ion Battery Pack depending upon
the amount of use. During this additional warranty period, the customer pays for only the
useable service received over and above the rst 1000 Charges/2 years, based on the date
of rst charge and number of charges found on the battery pack via MILWAUKEE’s Service
Reader. After 1000 charges/2 years from the date of purchase/ rst charge, the customer will
be charged a prorated amount for the service rendered.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE
product. However, proof of purchase in the form of a sales receipt or other information deemed
suf cient by MILWAUKEE, is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DE-
SCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF
EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU
SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LI-
ABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES,
OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED
TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY
PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CON-
DITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE
GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL
OTHER WARRANTIES.
This warranty applies to product sold in the U.S.A., Canada and Mexico only.
Please consult MILWAUKEE’s website www.milwaukeetool.com or call 1.800.SAWDUST
(1.800.729.3878) to locate your nearest service facility for warranty and non-warranty service
on a MILWAUKEE electric power tool.