Filter
Top Products
page 3
SPECIFIC SAFETY RULES - SANDERS
1. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden
wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
2. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.
3. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic
particles.
Specifications
Cat.
No.
6018
6019
Orbits
per Min.
12, 000
12, 000
Volts
AC
115
115
Amps
1.8
1.8
Pad Size
5"
5"
FUNCTIONAL DESCRIPTION
1. Vents
2. Dust bag
3. Nameplate
4. Pad
5. On/Off switch
5
2
3
4
1
Symbology
Volts Alternating Current
Amps
Canadian Standards Association
Underwriters Laboratories, Inc.
Double Insulated
OPM
Orbits per Minute (OPM)