Filter
Top Products
page 3
FUNCTIONAL DESCRIPTION
1. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden
wiring or its own cord. Contact with a live wire will make exposed metal parts of the tool live and shock the operator.
2. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against
your body leaves it unstable and may lead to loss of control.
3. Keep hands away from all cutting edges and moving parts.
4. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free
replacement.
5. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
lead from lead-based paint
crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic
particles.
SPECIFIC SAFETY RULES SAWZALLS
®
Double Insulated
Symbology
Canadian Standards Association
Underwriters Laboratories, Inc.
Volts Alternating Current
Specifications
Catalog
Number
6537-22
Volts
AC Only
120
Length of
Stroke
1-1/4"
Strokes
per Minute
0-3200
1. Handle
2. Trigger
3. Nameplate
4. Blade Clamp
5. Blade
6. Adjustable Pivot Shoe
7. Shoe Release Lever
8. Hex Key (Select Models)
9. Insulating Boot
10. Speed Control Dial
11. Quik-Lok
®
Cord
(Select Models)
5
2
7
4
6
1
9
3
8
11
10
Amps
No Load Strokes per Minute
(RPM)