Filter
Top Products
page 4
1. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring
or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2. Keep hands away from all cutting edges and moving parts.
3. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against
your body leaves it unstable and may lead to loss of control.
3. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free
replacement.
4. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic
particles.
FUNCTIONAL DESCRIPTION
SPECIFIC SAFETY RULES — SAWZALLS
®
1. Nameplate
2. Handle
3. Trigger
4. Quik-Lok
®
Cord (select models)
5. Speed control dial
6. Insulating boot
7. Shoe release lever
8. Adjustable pivot shoe
9. Blade
10. Blade clamp
11. Orbit control switch
Double Insulated
Symbology
Canadian Standards Association
Underwriters Laboratories, Inc.
Volts Alternating Current
No Load Strokes Per Minute
Amps
Straight Cut
Orbital Cut
Specifications
Catalog
No.
6521
Series
Volts
AC Only
120
Length of
Stroke
1-1/4"
Strokes
per Minute
0-3200
3
1
2
4
5
6
7
8
9
10
11
Amps
11