Filter
Top Products
PAGE 16 — HS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #1 (07/26/10)
The Multiquip
Side Winder
Cut-Off Saw comes with a Tool Kit
(Figure 4) that assists you with day to day operations.
You will
need these tools for the assembly of your saw.
Item
is a versatile screwdriver/wrench that accommodates
common bolt/screw and nut head sizes of your saw.
Item
is the wrench necessary to accommodate various
allen screws.
Figure 4. Tool Kit
HS62A CUT-OFF SAW — BLADE INSTALLATION INSTRUCTIONS
Blade Installation Procedure
STEP 1
For proper installation, first remove the
blade shaft nut
,
outer
flange
, and
inner
“dual-arbor” flange
.
Figure 5. Inner and Outer Flanges (Removal)
Figure 6. Inner and Outer Flanges (Placement)
STEP 2
A dual sided, “dual-arbor”
inner flange
accommodates either
a 20 mm or 1-inch arbor hole for operator safety and convenience.
The
outer flange
fits on top of the cutting blade.
STEP 3
Chose the proper
blade arbor
side of the
inner flange
(to match
your cutting blade arbor) and place this selected side to the
blade shaft
.
Figure 7. Selecting the Proper Blade Arbor
STEP 4
Match the arbor side to the dimension of your blade arbor and
“sandwich” between the inner and outer flanges. Tighten the
blade shaft nut
securely to hold the blade in place.
Figure 8. Securing the Cutting Blade