Filter
Top Products
HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #2 (07/26/10) — PAGE 23
Reversing the Cutting Arm Procedure
NOTE
This assembly procedure permits the operator to reorient the
cutting blade
closer to a wall, column
and/or object.
The Multiquip
Side Winder
Cut-Off Saw comes with a Tool Kit
(Figure 20) that assist you with day to day operations.
You will
need these tools for the maintenance of your saw.
Item
is a versatile screwdriver/wrench that accommodates
common bolt/screw and nut head sizes of your saw.
Item
is the wrench necessary to accommodate various allen
screws.
Figure 20. Tool Kit
This position displays the
cutting blade on the inside
(center)
cutting position. To reverse the blade position continue with the
following steps:
Remove the following items from the
Cutting Arm Assembly
to expose the V-belt:
■
Guard Adjustment Knob
■
Two Cap Screws
■
Cover Guard
Figure 21. Inside Center Cutting Position
Loosen the
belt tensioning cam
and remove the three
nuts
. This will take tension off the V-belt, and permit you to
reverse the
cutting arm
.
Figure 22 Belt Tensioning Cam
HS81A CUT-OFF SAW — MAINTENANCE