Filter
Top Products
SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 58
DECALS
DECALS
SP8-5030
WARNING
KEEP CLEAR
OF ROTATING
PARTS
BEFORE HOISTING THIS MACHINE
CONSULT WITH THEAPPLICABLEOPERATOR
MANUAL. IMPROPER HOISTING
PROCEDURES CAN RESULT IN PROPERTY
DAMAGE AND/OR PERSONALINJURY.
WARNING
CS8-5050
SP8-5040
WARNING
EAR AND EYE
PROTECTION
REQUIRED
GREASE DRIVESHAFT BEARINGS
EVERY 2 HOURS OF OPERATION OR
AS REQUIRED TO MINIMIZE RISK OF
GREASE CONTAMINATION.
CONTAMINATED GREASE WILL
REDUCE BEARING SERVICE LIFE.
CONSULT OPERATOR MANUAL FOR
DETAILED LUBRICATION
PROCEDURES.
2
SP8-5061
SP8-5050
WARNING
KEEP
GUARDS IN
PLACE
START MOTOR: ROTATE HANDLE TOWARD OPERATOR
STOP MOTOR: ROTATE HANDLE AWAY FROM OPERATOR OR RELEASE
ON/OFF CONTROL IS SPRING LOADED TO OFF POSITION. DO NOT OPERATE
MACHINE IF CONTROL DOES NOT STOP MOTOR WHEN HANDLE IS RELEASED.
ON
OFF
SP8-5020
1) BEFORE OPERATING THIS MACHINE, THOROUGHLY READAND
COMPREHEND THE CONTENTS OF THEAPPLICABLE OPERATOR'S MANUAL.
2) BEFORE STARTING THE POWER SOURCE, RAISE THE BLADETO FULLY
CLEAR THE WORK SURFACE. VISUALLY INSPECT THE BLADE/ARBOR
SHAFT.
3) THIS MACHINE IS DESIGNED TO BE PULLED TOWARD THE OPERATOR
DURING NORMAL OPERATION.
IMPROPER STARTING/OPERATION PROCEDURES CAN RESULT IN PROPERTY
DAMAGE AND/OR PERSONALINJURY.
WARNING
CS8-5050
1
2
3
4
5
6
7
8