Nady Systems SC-100 Welding System User Manual


  Open as PDF
of 2
 
(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411
or e-mail at service@nady.com.
(International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased
this product.
SERVICE
FOR YOUR NADY AUDIO PRODUCT
NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608
Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com
FRONT CONTROLS
(1)
(1) Key Switch On/Off — On begins the power up sequence. Off begins the power Off sequence.
(2) Status LED’s for the 10 outlets — LED is On when the outlet is turned On.
(3) Input power LED — Led is ON when the AC is connected to the input.
(4) Bypass switch — In begins the power up sequence. Out begins the power Off sequence, unless the key is On. Because this switch
is recessed, in order to depress please access via the Bypass hole with an appropriate small diameter tool, jeweler’s screwdriver, piece
of stiff wire, etc.
& CONNECTIONS
(2)
(4)(3)
(5) AC power input connector IEC — Detachable power cord supplied for US or European source.
(6) AC output connectors, 10 each — Compatible with standard US 3-prong plug or European Round-pin plug.
The output sockets are turned on one at a time from 1-10 and turned off one at a time 10-1, with a 1 second delay.
(7) Voltage select switch — Configures internal power supply for 115/230 VAC operation.
(8) Fuse AC input — 20A for 115 VAC, 10A for 230 VAC operation.
REAR CONTROLS
& CONNECTIONS
F
U
S
E
CH 10CH 9CH 8CH 7CH 6CH 5CH 4CH 3CH 2CH 1
230VAC
115VAC
POWER
AC IN
FUSE
(6)
(7)
(8)
(5)
For use in US and Canada 120 VAC 60 Hz or Europe 230 VAC 50 Hz, or UK and Australia 240 VAC 50 Hz.
Fuse size: 3AG
For 115 VAC operation use 20A, 250V fuse.
For 230 VAC operation use 10A, 250V fuse.
Output connectors: 20A
Power control: 10 channel, 1 second delay
Dimensions: 1.75” x 19” (44mm x 482mm)
Weight: 16 lbs. (7.25 Kg)
SPECIFICATIONS
 previous