Filter
Top Products
Page:
6 of 7
INSPECTION, MAINTENANCE AND CLEANING
1. Always make sure the trigger is in its “OFF” position, and disconnect the Die Grinder from
its compressed air supply before performing any inspection, adjustments, maintenance, or
cleaning.
2. Before each use, inspect the general condition of the Die Grinder. Check for loose screws,
misalignment or binding of moving parts, cracked or broken parts, damaged air hose, and
any other condition that may affect its safe operation. If abnormal noise or vibration occurs,
have the problem corrected before further use. Do not use damaged equipment.
3. Daily: With a clean cloth, remove all dirt, oil, and grease from the Die Grinder. If necessary,
you may use a mild detergent. Do not use solvents, as damaged to the Die Grinder may
occur. Do not immerse the Die Grinder in any liquids.
Diagram & PARTS LIST