Filter
Top Products
Northern Industrial Welding
3
Operating Instructions and Parts Manual
ST80i
Welding Cable and Electrode Holder
One end of cable is connected to output connectors of the machine. The
electrode is clamped in the electrode holder for welding.
Output “-” Connector
This is the connector for grounding cable when STICK welding. When this
machine is used for TIG welding, this connector is for the TIG torch
Power Cord
The power cord connects the welder to the 110-120v volt power supply.
Plug the 15 amp plug into a 115 volt/20 amp receptable to supply power
to the welder
Wiring Diagrams