Filter
Top Products
53
fluid, check the fan and accessory belts, clean the cooling fins, and also
check for any fluid leakage. Do not pressure wash the transmission!
3. Use only the proper viscosity and type of fluid. At normal operating
temperatures, the optimum viscosity range is between 80-180 SUS (16-40
CS) and it should never fall below 60 SUS (10 CS).
4. The fluid should be chemically stable, incorporating rust and oxidation
inhibitors.
Recommended Fluids For Eaton Model 6 Transmissions
1. Mobil Fluid 300
2. Texaco TL 2209
3. Dextron B (General Motors)
4. M2C-33F And M2B-41A (Ford Motor)
5. Hy-Tran (International Harvester)
6. 10W Straight Viscosity SE, CC, or CD Rated Engine Oil
*7. 20W Straight Viscosity SE, CC, or CD Rated Engine Oil
8. 30W Straight Viscosity SE, CC, or CD Rated Engine Oil
* Factory Supplied Transmission Fluid
G. Self-Propelling Operations
The C61xx Series Concrete Saws are equipped with self-propelling system
consisting of an Eaton Model 6 Hydrostatic Transmission which drives the Rear
Axle of the machine through a large Gear located on the Rear Axle. The
Transmission can be disengaged so that the machine can be moved with out
running the engine; this function is known as freewheeling.