Filter
Top Products
6
SmartHeat
®
& Calibration
Each cartridge or tip is equipped with a self-regulating heater which ‘senses’ its own
temperature and tightly maintains its pre-set idle temperature for the life of the heater-tip;
all controlled by OK International’s proprietary SmartHeat
®
Technology. The tip
temperature is determined by the inherent metallurgical properties of the heater; no
external adjustment or equipment is required. The power delivered to the tip
automatically varies in direct response to the thermal load. This eliminates spikes and
transients associated with electrically switched elements found in conventional soldering
irons. Please feel free to contact your OK International representative with any
questions.
Warranty
OK International warrants the MFR against any defects in materials or workmanship for
one (1) year from the date of purchase by the original owner. This Warranty excludes
normal maintenance and shall not apply to any opened, misused, abused, altered or
damaged items. If the product should become defective within the warranty period, OK
International will repair or replace it free of charge at its sole option. The repaired or
replacement item will be shipped, freight prepaid, to the original purchaser. The warranty
period will start from the date of purchase. If the date of purchase cannot be
substantiated the date of manufacture will be used as the start of the warranty period.
The MFR-H2-ST handpiece uses a coil assembly (MFR-CA2) which is a replaceable
item. OK International warrants the coil for 30-days regular use.
For contact details for Warranty and Support look for your local office details at:
www.okinternational.com
Please visit OK International’s web page (www.okinternational.com) where you will
find available information on systems, accessories, technical notes, and more.