Olympus B-20 LPC Battery Charger User Manual


 
12
Charging the battery
1
Connect the AC cable
plug to the AC input
connector on the charger.
2
Plug the AC power cord
into an AC power outlet.
3
Place the battery on the battery charger and slide it
in until you hear a click.
The charging indicator may blink for an instant (less
than one second) when the battery is inserted or just
before charging is complete. However, this is normal
and merely shows that the charger is communicating
with the battery.
To home AC outlet
Notes
In the following cases, it should be assumed that this
product is out of order. Unplug the AC power cord
immediately and consult your local Olympus
representative.
Charging has not finished after six hours.
The red or green charging indicator blinks after several
charges.
Terminal
Check the battery's status by the color of the
charging indicator.
Charging
indicator color
Orange
Green
Red
Charging indicator
condition
Lit.
Lit.
Blinking.
Blinking.
Battery status
Charging is
continuing
normally.
Charging is
complete.
An error has
occurred.*
Too much
charging time has
passed. The
battery has
weakened or is
defective.*
* Remove the battery immediately. If the battery can not
be fully charged under normal operating conditions, then
it is most likely defective. Replace the battery with a
new one.