Filter
Top Products
12
XI. Directions for Cleaning External Filter
Pro 2000 Owners Manual
O.A.S. 2007
c
The External Filter can be cleaned using the following methods:
Wait a few minutes for internal dust to settle
then unclip and carefully empty dust bin.
Keep nozzle at least 6 from filter and keep your
pressure down. Closer blasts may damage filter
material. Rinse off INSIDE of filter. Let filter dry
completely before reuse or keep a spare filter
on hand.
2. Empty Dust Bin.
All steps should be done with a dust mask and eye protection.
3. Rinse with water. (Optional)
1. Compressed air from outside.
Blast air along pleats of the filter at about a 20
angle. Blast air out and away from you or anyone
in the general area.
Keep air nozzle at least 6 from filter. Closer
blasts may damage filter material.
6
Filter must be cleaned regularly or filter
damage may result. If gauge reaches 3,
it is time to clean your filter. Never allow
gauge to reach 5. You could destroy your
filter. See page 11.