Filter
Top Products
-
7
-
WARNING!
• Do not use other than the Panasonic
battery packs that are designed for use with
this rechargeable tool.
• Panasonic is not responsible for any
damage or accident caused by the use of
the recycled battery pack and the counterfeit
battery pack.
• Do not dispose of the battery pack in a fire,
or expose it to excessive heat.
• Do not drive the likes of nails into the battery
pack, subject it to shocks, dismantle it, or
attempt to modify it.
• Do not allow metal objects to touch the
battery pack terminals.
• Do not carry or store the battery pack in the
same container as nails or similar metal
objects.
• Do not charge the battery pack in a high-
temperature location, such as next to a fire
or in direct sunlight. Otherwise, the battery
may overheat, catch fire, or explode.
• Never use other than the dedicated charger
to charge the battery pack. Otherwise, the
battery may leak, overheat, or explode.
• After removing the battery pack from the
tool or the charger, always reattach the
pack cover. Otherwise, the battery contacts
could be shorted, leading to a risk of fire.
• When the Battery Pack Has Deteriorated,
Replace It with a New One.
Continued use of a damaged battery pack
may result in heat generation, ignition or
battery rupture.
IV. ASSEMBLY
Attaching or Removing
Sock et
1. Attaching Socket
1) Remove the rubber ring and pin.
rubber ring
pin
groove
2) Attach the socket putting each holes.
3) Attach the rubber ring and pin in reverse
order of 1).
NOTE:
Attach socket firmly by using pin and
rubber ring.
Retainer ring is only for temporary
fixing.
2. Removing Socket
1) Remove the rubber ring and pin.
rubber
ring
pin