Filter
Top Products
J Wear suitable clothing. Do not wear loose
clothing or jewellery. Keep your hair, clothing
and gloves well away from moving components.
Wear a hairnet if you have long hair. Loose, not
well-fitting clothing, jewellery and long hair can
become caught up in moving components.
J Use dust suction and / or collection units if these
can be assembled. Thereby take note that the
dust collection units fitted must be suitable for
this particular area of application. The correct
use of these equipments reduces potential
dangers caused by dust.
J Immobilise the workpiece securely. Use clamps /
vices to firmly hold the workpiece. It is thus better
secured than just with your hand.
L
Diligent Interaction
and Use of Electrical Hand Tools
J Do not overburden your electrical tools. Use the
electrical hand tool that is applicable to the work
to be done.
It works better and safer in the pre-determined
area of performance.
J Never use an electrical hand tool that has a
defective switch. An electrical hand tool that can
no longer be switched on or off is dangerous
and must be repaired before being used.
J Remove the plug from the socket before making
adjustments on the appliance, changing ancillaries
or putting it into storage. These precautions pre-
vent the unintentional starting of the appliance.
J Store unused electrical hand tools out of the
reach of children. Do not permit individuals to
use appliances if they are not informed about
the interaction with them or they have not read
these instructions. Electrical hand tools can be
dangerous when in the hands of inexperienced
people.
J Maintain the appliance with care. Check to see
that all moving parts are free-running and do
not jam. Regularly check to see if components
are broken or so worn and / or damaged that
they have a negative influence on the perform-
ance of the appliance. Arrange for damaged
components to be repaired before using the
appliance. Many accidents have their origin in
poorly maintained electrical hand tools.
J Keep cutting tools sharp and clean. Carefully
maintained cutting tools with sharp cutting
edges jam less often and are easier to guide.
J Keep hand grips dry, clean and free from oil
and grease.
J Use electrical hand tools, accessories or ancil-
lary components only in accordance with these
instructions and in such a manner as is detailed
for the particular types of appliance. Take con-
sideration thereby of the working conditions and
the task to be completed. The use of electrical
hand tools for purposes other than those origi-
nally intended can lead to dangerous situations.
L
Service
J Permit your appliance to be repaired only by
qualified specialists and only with original spare
parts. Thus, you can be certain that the safety of
your appliance is assured.
J Permit the exchange of plugs and power cables
to be carried out only by the manufacturer of the
hand tool or his authorised customer service.
Thus, you can be certain that the safety of your
appliance is assured.
L
Original ancillaries / and accessories
j Use only the ancillaries and accessories detailed
in the operating instructions.
The use of ancillaries and accessories other
than those detailed in the operating instructions
could mean the risk of injuries for you.
Attention - Service lines!
J Attention! Take steps to ensure you do not,
resp. cannot, damage electrical, gas or water
service lines when working with electrical power
tools. If necessary, carry out a check with a cable /
pipeline detector before boring or cutting into
a wall.
Safety
8 GB/IE