Parkside PHKP 500SE Glue Gun User Manual


 
9 GB/IE/CY
Operation / Maintenance and Cleaning / Service / Warranty
Gluing:
˽ Press the feed clamp
5
to regulate the flow of
glue as required for your work.
1. Apply the glue in individual dots. Apply in zig-
zags on flexible materials such as fabrics.
2. Immediately after applying the glue, press the
two materials together for about 30 seconds. The
glued joint can be loaded after about 5 minutes.
3. When you take a break from work, set the
glue gun down on the wire stand
6
or in the
charger
4
.
4. Remove any glue residue with a sharp knife
after cooling. Glued joints can be loosened
again by applying heat.
Switching off the device:
½ Pull the mains lead out of the mains socket.
Changing the nozzle:
½ Wear protective gloves.
˽ Heat up the device for about 4 minutes.
Change the nozzle
8
when it is hot.
½ DANGER OF BURNS! Touch the
nozzle
8
only by the heat shield
9
.
The nozzle tip is hot!
©
Maintenance and Cleaning
The glue gun is maintenance-free.
½ WARNING! Pull the mains lead out of the
mains socket before you clean the tool.
˽ Always keep the device clean and dry.
˽ Do not allow any liquids to enter the tool. Use
a soft cloth to clean the housing. Never use
petrol, solvents or cleaning agents that might
attack plastic.
©
Service
½
WARNING!
Have your device
repaired only by qualified specialist
personnel using original manufacturer
parts only. This will ensure that your device
remains safe to use.
½
WARNING!
If the plug or mains
lead needs to be replaced, always
have the replacement carried out by
the manufacturer or its service centre.
This will ensure that your device remains safe
to use.
©
Warranty
This appliance is guaranteed for 3 years
from the date of purchase. It has been care-
fully produced and meti-culously checked
before delivery. Please keep your receipt
as proof of purchase. Contact your service
centre by telephone in case of questions
pertaining to the warranty. Your goods
can be transmitted free of cost only in this
manner. This warranty applies only to the
initial purchaser and is non-transferable.
The warranty covers only material or manufacturing
faults, not normal wear or damage to fragile parts
such as switches or rechargeable batteries. The appli-
ance is intended solely for private, not commercial,
use.
If this product has been subjected to improper or
inappropriate handling, abuse, or interventions not
carried out by one of our authorised sales and
service outlets, the warranty will be considered void.
This warranty does not affect your statutory rights.
GB
DES UK LTD
Tel.: 0871 5000 700 (£ 0,10 / minute)
e-mail: support.uk@kompernass.com
IE
Kompernaß Service Ireland
Tel.: 1850 930 412 (0,082 €/Min.)
* Standard call rates apply.
Mobile operators may vary.
e-mail: support.ie@kompernass.com