Parkside PLBS 30 Soldering Gun User Manual


 
16 GB/IE/CY
Operation / Maintenance and cleaning
You can fashion and decorate various materials with your soldering
pencil. Remove the parts of the surface or engrave design elements
into it (see Fig. D).
You can carry out these decorations in, for example, wood, leather,
paper, papier mâché, smooth fabrics, thin plastics or candle wax.
Try every application out on surplus material and see if you get the effect
you wish to have. This means you will avoid damaging the item you
wish to work on.
Universal attachment
9
:
E.g. for drawings with broad and thin lines on various materials
Pointed attachment
10
:
E.g. for details or shading in over large areas
Conical attachment
11
:
E.g. for dots, curves and handwriting, detailed work
©
Maintenance and cleaning
WARNING!
RISK OF INJURY! Before you carry out any work
on the device always pull the mains plug out of the mains socket and
allow the device to cool.
˽ Clean the device after you have finished using it.
˽ Use a cloth and a little mild detergent for cleaning the device.
˽ In no circumstances use sharp objects, or petrol, solvents or clean-
ing agents that might attack plastic.
˽ Do not allow any liquids to enter the inside of the device.