Filter
Top Products
13 GB/IE
Safety advice / Before first use
©
Original accessories / attachments
½ Use only the accessories detailed in the operating instructions. The
use of attachments or accessories other than those recommended
here could lead to you suffering an injury.
©
Before first use
©
Fitting the helical spring
˽ Insert the narrower end of the helical spring
3
into the opening
of the multifunctional holder
7
. Ensure that the outwardly bent
end of the helix points upwards and insert it into the recess provid-
ed for it in the multifunctional holder
7
(see arrow in Fig. B).
˽ Push the helical spring
3
into the opening as far as it will go.
˽ Turn the helical spring
3
clockwise to fix the multifunctional
holder
7
in place.
©
Inserting / replacing soldering tips
CAUTION! DANGER OF BURNS! Allow the soldering
pencil to heat up without a soldering tip.
½ Removal of a soldering tip
2
or a copper attachment
9
10
11
may only be done when the appliance has been switched off and
the soldering tip or attachment has cooled down.
˽ All soldering tips and attachments have a screw thread and can,
therefore, be easily and quickly replaced on the soldering pencil
1
.
Turn the soldering tip or attachment anti-clockwise to remove it.
Turn the soldering tip or attachment clockwise to fix it in place.