Filter
Top Products
10 GB/IE
½ Avoid contact with the moving sand-
ing sheet.
½ Use the appliance only with a sanding
sheet in place.
½ Never use the appliance for purposes
other than those intended and only
with original components / accessories.
½ Introduce the appliance to the work
piece with it switched on. On task com-
pletion, lift the appliance from the work piece
and then switch it off.
½ Permit the switched off appliance to
come to a complete standstill before
putting it down.
½ The appliance must always be kept
clean, dry and free of oil or grease.
½ Keep your workplace clean. Material
mixtures are particularly dangerous. Light met-
al dust can burn or explode.
½ Do not use the electric tool with a
damaged lead. Do not touch the damaged
lead and remove the mains plug if the lead be-
comes damaged while you are work-ing with
the device. Damaged leads increase the risk of
an electric shock.
©
Original accessories / tools
½ Use only the accessories detailed in the operat-
ing instructions. The use of inserted tools or ac-
cessories other than those recommended in the
operating instructions could lead to you suffer-
ing an injury.
©
Before use
©
Selecting the Grinding Disc
Metal Removal and Surface:
The rate of metal removal and the surface quality
are determined by the grain size of the grinding disc.
˽ lease note that corresponding grinding discs
with different grain sizes should be used for
processing different materials.
©
Changing sanding sheets
WARNING!
RISK OF INJURY! Before
carrying out work on the appliance, always re-
move the plug from the power socket.
The rotary sander is fitted with a velcro rapid attach-
ment, making possible a quick and easy exchange
of sanding sheets.
˽ Lift the grinding disc
5
at the side and pull it off
from the backing pad
4
in order to remove it.
Note: Before securing a new sanding sheet
5
,
remove all dust and dirt from the sander plate
4
.
˽ Ensure that the openings in the sanding sheet
5
concur with the boreholes of the sanding plate
4
.
©
Dust / Swarf Removal by Suction
½ Please note the “Safety instructions” section.
Removal by Suction with Dust Collector:
˽ Push the dust collector
3
completely onto the
device.
˽ In order to empty the dust collector
3
pull it
off the device.
Note: Empty the dust collector
3
in good
time and regularly in order to ensure the opti-
mum removal of dust by suction.
External Exhaust Suction (see Illustration A):
Connection:
˽ Push the adapter for external exhaust suction
7
on to the exhaust nozzle
6
and turn it clock-
wise to fix it in place. If necessary, use the re-
ducing piece
8
by pushing it into the adapter
for external exhaust suction
7
.
˽ Push the hose of an approved suction device
(e.g. a workshop vacuum cleaner) on to the
adapter for external exhaust suction
7
, using
the reducing piece if necessary
8
.
Removal:
˽ Pull the hose of the suction device off the
adapter for external exhaust suc-tion
7
.
˽ Turn the adapter for external exhaust suction
7
in an anticlockwise direction and pull it off with
the reducing piece
8
if necessary.
General safety advice for electrical power tools / Before use