Filter
Top Products
10 GB
Q
Understood everything?
J You may begin to work with the appliance when
you have familiarised yourself with the instructions,
functions and handling of the appliance. The
safest work is possible by heeding all informa-
tion and instructions of the manufacturer.
Q
Before use
Q
Changing sanding sheets
WARNING!
Before carrying out work on the
appliance, always remove the plug from the power
socket.
The rotary sander is fitted with a velcro rapid attach-
ment, making possible a quick and easy exchange
of sanding sheets.
Note: Before securing a new sanding sheet
9
,
remove all dust and dirt from the sander plate
8
.
j Ensure that the openings in the sanding sheet
9
concur with the boreholes of the sanding plate
8
.
Q
Selecting rotation speeds
and sanding sheets
Removal rate and surface quality
The removal rate and the surface quality are deter-
mined by the rotation speed and the gritting of the
sanding sheet.
j Please take note that, for working the various
materials, you must select the appropriate
sanding sheet, one with a suitable gritting, and
match it to an appropriate rotation speed.
Material / Working
range
Softwood
Rough finish (Gritting) 60
Fine finish (Gritting) 240
Rotation speed preselection
high (
E+)
Material / Working
range
Hardwood
Rough finish (Gritting) 60
Fine finish (Gritting) 180
Rotation speed preselection
high (
E+)
Material / Working
range
Abrade varnish
Rough finish (Gritting) 180
Fine finish (Gritting) 400
Rotation speed preselection medium (- F)
Material / Working
range
Remove paint / varnish
Rough finish (Gritting) 40
Fine finish (Gritting) 80
Rotation speed preselection medium to high
Material / Working
range
Metals
Rough finish (Gritting) 80
Fine finish (Gritting) 240
Rotation speed preselection medium to high
These are noncommittal declarations and recommen-
dations.
Q
Commissioning
The voltage of the power source must tally with the
details given on the rating plate of the appliance.
Appliances requiring 230 V can also be run on 220 V.
Q
Switching on and off
Notice! Always switch the rotary sander on be-
fore applying it to the material to be worked, then
make contact with it.
When operating the device you can select be-
tween intermittent or continuous operation mode
To switch on intermittent operation mode:
j Press the On / Off switch
2
.
General safety advice / Before use / Commissioning